南京通讯电缆西门子模块代理商供应

6AG1518-4JP00-4AB0

SIPLUS S7-1500 CPU 1518HF-4 PN 基于 6ES7518-4JP00-0AB0 带防腐蚀涂层，中央处理器，带 工作存储器 9 MB 用于 程序及 60 MB 用于数据， 第 1 个接口：PROFINET RT 带双端口交换机，第 2 接口：PROFINET， 第 3 接口：PROFINET， 4./5.接口：H-SYNC， 需要 SIMATIC存储卡

《服务说明》：现货配送至全国各地含税（13%）含运费！

《产品质量》：原装，全新原装！

《产品优势》：销售 薄利多销 信誉好，口碑好，价格低，货期短，大量现货,服务周到

概述

• The CPU for applications with high availability re,also in connection with functional safety re.
  

• Can be used for safety functions up to SIL 3 according to IEC61508 and up to PL e according to ISO 13849
  

• A very large program data memory enables the realization ofextensive applications
  

• High processing speed for binary and floating-pointarithmetic
  

• Used as central PLC with distributed I/O
  

• Supports PROFIsafe in distributed configurations
  

• PROFINET IO RT interface with 2-port switch
  

• Two additional PROFINET interfaces with separate IPaddresses
  

• PROFINET IO controller for operating distributed I/O onPROFINET
  

Note:

SIMATIC Memory Card required for operation of the CPU.

SIPLUS extreme products are based on SIMATIC standard products.The contents listed here were taken from the respective standardproducts. SIPLUS extreme-specific information was added.

应用

The CPU 1518HF-4 PN is the CPU with an extremely large programand data memory for applications which have higher re foravailability compared with standard and fail-safe CPUs.
It is suitable for both standard and safety-critical applicationsup to SIL3 / PLe.

The CPU can be used as PROFINET IO controller. The integratedPROFINET IO RT interface is designed as a 2-port switch, enabling aring topology to be set up in the system. The additional integratedPROFINET interfaces with separate IP addresses can be used fornetwork separation, for example.

设计

The CPU 1518HF-4 PN has:

• A powerful processor:
  The CPU achieves command execution times as low as 4 ns perbinary instruction.

• Extensive work memory:
  9 MB for program, 60 MB for data

• SIMATIC Memory Cards as load memory

• Display with functions for

• Display of overview information such as station name, plantdesignation, location identifier, etc.

• Display of safety mode, overall signature and date of the lastdownload with signature change

• Showing diagnostic information

• Showing module information

• Showing display settings

• Setting IP addresses

• Setting the date and time

• Displaying operating mode (redundant or non-redundant)

• Displaying the status (stop, primary or backup)

• Resetting the CPU to factory settings

• Disabling/enabling of the display

• Enabling protection levels

• PROFINET IO RT interface for connecting distributed I/O viaPROFINET

• Supports PROFIsafe in centralized and distributedconfiguration

功能

• Performance

• Faster command processing, depending on the CPU type, languageextensions and new data types

• High-performance network connection: Each CPU is e withPROFINET IO RT (2-port switch) as standard interface. AdditionalPROFINET interface integrated, e.g. for network separation.

• Security Integrated

• Password-based know-how protection against unauthorized read-outand modification of program blocks

• Copy protection for tying individual blocks to the serial numberof the SIMATIC Memory Card:
  The block can only run if the configured memory card is inserted inthe CPU.

• 4-level authorization concept:
  Communication to operator panels can also be restricted.

• Manipulation protection:
  The controller recognizes changed or unauthorized transmissions ofthe engineering data.

• Design and handling

• Display of overview information:
  e.g. station name, plant designation, location identifier, etc.,diagnostic information, module information, display settings.

• Possible operations on the display:
  Set addresses, set date and time, select operating mode of CPU,reset CPU to factory settings, disable/enable display, activateprotection levels.

• Integrated system diagnostics

• System diagnostics information is displayed consistently and inplain text in the display, TIA Portal and operator panels, even formessages from the drives, and updated even if the CPU is in STOPmode.

• Integrated in the firmware of the CPU, no special configurationis required

• SIMATIC Memory Card (required for operation of the CPU)

• Used as plug-in load memory or for updating the firmware.

• Also for storing additional documents or csv files (for recipesand archives)

• Programming of the standard program section

• Programming with STEP 7 V17

• Programming of the fail-safe program section

• Programming of the safety-oriented program section with the"STEP 7 Safety Advanced" option package.
  

• 
  

南京通讯电缆西门子模块代理商供应                                           南京通讯电缆西门子模块代理商供应